Pools from 15,000 litres up to 150,000 litres
Enjoy swimming in chlorine-free water, crystal clear, clean and silky smooth, soft and natural, without eye or skin irritation.Â No more red eyes, dry skin, or unpleasant smells.
BIOXpool is a highly effective natural disinfectant that is fully biodegradable into just oxygen and water, is non-toxic and produces no toxic disinfection by-products. It is safe for you, your family, your pool and the environment.
Enjoy your BIOXpool treated pool.
Follow the instructions on the pack to ensure optimal performance
Tip: How to switch easily from chlorine to BIOXpool
Step 1: Ensure the water in the pool is properly balanced ( total alkalinity, pH, Calcium Hardness ) and the filter is clean. Adjust the pH level to between 6.5 and 7.0. and neutralise any remaining chlorine by adding 200 ml per 1000 litres of BIOXpool to your pool water as shown on the label. Circulate the water with the filter pump and allow as contact time of 1 hour for the reaction to complete.
Step 2: Re-adjust the pH to between 7.2 and 7.5 and add the correct amount of BIOXpool to your swimming pool according to the pool volume and the instructions on the label. Follow the recommendations carefully and contact HydroWater if need for more information.
Step 3: Ensure the water balance is properly maintained. Pool conditions should be;
Total alkalinity (TA) – 80 to 120 ppm, pH – 7.2 to 7.5, Calcium hardness (CH) – 100 to 300 ppm, BIOXpool – 20 to 60 ppm (Test strips)
Step 4: For best results we recommend that the pool filter is cleaned regularly.
TIP: In cases where the pool has previously been used with chlorine, we recommend that you fully refresh (change) the water before adding BIOXpool
(Note: Always observe your pool builder’s instructions before emptying your pool)
Please use BIOXtest test strips to test the water.
Use biocides safely. Please read the label safety instructions before use