MiniPOOL
MiniPOOL
Pools up to 15,000 litres
Enjoy the sight of the whole family being able to play in the pool knowing that the water is clean, pure, and safe.
By using BIOXpool you provide a healthy chlorine free pool without the unpleasant smell and the discomfort of eye and skin irritations that comes with the use of chlorine and the unwanted by-products that it can produce. In addition, it will also help prevent the algae that can cause pool floors becoming slippery and dangerous.
Follow the instructions on the pack to ensure optimal performance
Advantages:
- Complete protection against bacteria, and other micro-organisms
- Keeps your pool clean and free from the algae that causes floors to become dangerously slippery.
- Colourless, odourless and tasteless
- Completely free of chlorine and other hazardous chemicals
- 100% biodegradable into water and pure oxygen
- Effective over a wide range of pH levels
- Oxygen improves the smoothness and softness of the skin
Tip: How to switch easily from chlorine to BIOXpool
Step 1: Ensure the water in the pool is properly balanced ( total alkalinity, pH, Calcium Hardness ) and the filter is clean. Adjust the pH level to between 6.5 and 7.0 and neutralise any remaining chlorine by adding one litre of BIOXpool Mini Pool per 1000 litres to your pool water as shown on the label. Circulate the water with the filter pump and allow as contact time of 1 hour for the reaction too complete
Step 2: Re-adjust the pH to between 7.2 and 7.5 and add the correct amount of BIOXpool to your swimming pool according to the pool volume and the instructions on the label. Follow the recommendations carefully and contact HydroWater if need for more information.
Step 3: Ensure the water balance is maintained. Pool conditions should be;
Total alkalinity (TA) – 80 to 120 ppm, pH – 7.2 to 7.5, Calcium Hardness (CH) – 100 to 300 ppm, BIOXpool – 20 to 60 ppm (Test strips)
Step 4: For best results we recommend that the pool filter is cleaned regularly
TIP: In cases where the pool has previously been used with chlorine, we recommend that you fully refresh (change) the water before adding BIOXpool
Please use BIOXtest test strips to test the water.
Use biocides safely. Please read the label safety instructions before use
